MX5Link – MX5NB1X

MX5Link - MX5NB1X

MX5Link – MX5NB1X

£1,374.00

Note: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Link PN 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.

SKU: 240-4000 Categories: ,

Description

MX5Link – MX5NB1X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.

Designed for the Pre-Facelift MX5 NB (MY1998-2000, 3 Plug ECU, non-VVT 1.8L Engine)

  • Please check your connector matches the header in the listed photo before purchasing.
  • This ECU works for manual transmissions only.
  • Includes onboard 7 bar MAP sensor
  • Most factory features are supported
  • Check the features tab for I/O expansion options

MX5Link – MX5NB1X PlugIn Key Features:

  • Up to 6D fuel and ignition mapping
  • Precision closed loop cam control (four cam, independent control)
  • Sequential fuel delivery
  • Digital triggering, all OEM patterns
  • OEM idle hardware supported
  • 5D boost control with three switchable tables
  • Motorsport features – antilag, launch, flat shift
  • Continuous barometric correction (on board)CAN port
  • QuickTune – automated fuel tuning
  • Individual cylinder correction
  • USB tuning cable included
  • Stats recording into on-board memory
  • Gear compensations for spark, boost and fuel
  • Real time selectable dual fuel, ignition and boost maps
  • Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
  • Boost control referenced to gear, speed or throttle position
  • 512 mega bytes data logging memory
  • Staged injection
  • Knock with “windowing”

    I/O Expansion Options:

    The following expansion connector inputs/outputs are provided:

    Expansion Connector 1

  • Pin 1- An Temp 4
  • Pin 2- An Temp 3
  • Pin 3- DI 10
  • Pin 4- DI 9
  • Pin 5- DI 8
  • Pin 6- DI 7
  • Pin 7- IGN 4
  • Pin 8- IGN 3E-Throttle Connector
  • Pin 1- Ground (signal)
  • Pin 2- +5V out
  • Pin 3- An Volt 12
  • Pin 4- An Volt 11
  • Pin 5- An Volt 10
  • Pin 6- An Volt 9
  • Pin 7- Aux 10
  • Pin 8- Aux 9

For more information Contact us Here

Related products